当前位置: 首页 > 期刊 > 《国际口腔医学杂志》 > 2012年第4期
编号:12824772
牙科用氧化锆陶瓷的低温时效及其影响因素
http://www.100md.com 2012年8月1日
1氧化锆低温时效的原理,2影响低温时效的因素,3改善抗低温时效的方法,4结束语,5参考文献,牙科陶瓷
第1页

    参见附件。

     [摘要]牙科用氧化锆陶瓷由于其良好的力学性能、高温稳定性、生物安全性和低热传导率,现已广泛应用于临床,特别是后牙全冠及固定桥修复。然而,在相对较低的温度及潮湿的环境下,氧化锆发生由部分稳定的四方晶相向单斜晶向的改变,即低温时效现象,影响其力学性能。本文探讨了牙科用氧化锆的低温时效及其影响因素,并讨论了改善其抗低温时效性的途径。

    [关键词]牙科陶瓷;氧化锆;低温时效

    [中图分类号]R 783.1[文献标志码]A[doi]10.3969/j.issn.1673-5749.2012.04.021

    Low temperature degradation of dental zirconia ceramic and its influencing factorsHao Zhichao1, Meng Yukun2.(1. State Key Laboratory of Oral Diseases, Sichuan University, Chengdu 610041, China; 2. Dept. of Prosthodontics, West China Hospital of Stomotology, Sichuan University, Chengdu 610041, China)

    [Abstract]Dental zirconia ceramics, with their excellent mechanical properties, high temperature stability, biocompatibility and low thermal conductivity, have been widely used for clinical all-ceramic restorations, especially for full crown and fixed bridge of posterior teeth. However, under comparatively low temperature in humid environment, partially stabilized tetragonal zirconia ceramic tends to transform into monoclinic crystal. This phenomenon is called low temperature degradation(LTD), which will result in poor mechanical properties of the material. This article discussed the LTD phenomena of the partially stabilized tetragonal zirconia and its related influencing factors, and possible approaches to improve its low temperature degradation resistance were proposed as well.

    [Key words]dental ceramic;zirconia;low temperature degradation

    牙科用氧化锆陶瓷由于其良好的力学性能、高温稳定性、生物安全性和低热传导率,现已广泛应用于修复临床,如氧化锆全瓷桩、氧化锆种植体等,特别是后牙的全冠及后牙固定桥修复。氧化锆材料的机械性能主要取决于材料颗粒的精细程度和可相变的微观结构,而这一结构在整个临床使用期间能够保持稳定是氧化锆获得长期临床成功率的关键。

    牙科用氧化锆陶瓷通过四方相到单斜相相变产生的体积膨胀效应,从而抑制材料结构中裂纹锋面的扩展,达到增韧强化的效果,此即相变增韧原理[1]。临床应用相变增韧原理的氧化锆全瓷材料主要有3类。1)氧化锆扩散增韧陶瓷,如锆增韧氧化铝(zirconia toughed alumina,ZTA)和锆增韧莫耐石(zirconia toughed mullite,ZTM),其将四方晶相作为增韧相分散到其他陶瓷基体中。牙科临床使用的典型例子如Vita Zahnfabrik的InCeram Zirconia。2)部分稳定的氧化锆(partially stabilized zirconia,PSZ)例如Ca-PSZ、Mg-PSZ、YPSZ。通过加入一定量的CaO、MgO、La2O3和Y2O3使立方相基体上弥散分布着四方晶相的氧化锆晶粒。3)四方晶相氧化锆多晶体(tetragonal zirconia polycrystals ......

您现在查看是摘要介绍页,详见PDF附件