[14] PARK J H， JUNG J W， KANG H W， et al. Indirect three-dimensional printing of synthetic polymer scaffold based on thermal molding process[J]. Biofabrication， 2014，6(2)：25003.
[15] LEIGH S J， BRADLEY R J， PURSSELL C P， et al. A simple， low-cost conductive composite material for 3D printing of electronic sensors[J]. PLoS One， 2012，7(11)：e49365.
[16] LEE V， SINGH G， TRASATTI J P， et al. Design and fabrication of human skin by three-dimensional bioprinting[J]. Tissue Engineering Part C - Methods， 2014，20(6)：473-484.
[17] ABBADESSA A， MOUSER V H M， BLOKZIJL M M， et al. A Synthetic thermo-sensitive hydrogel for cartilage bioprinting and its biofunctionalization with polysaccharides[J]. Biomacromolecules， 2016，17(6)：2137-2147.
[18] AL-RAMAHI J， LUO H， FANG R， et al. Development of an Innovative 3D Printed Rigid Bronchoscopy Training Model[J]. Ann Otol Rhinol Laryngol， 2016，125(12)：965-969.
[19] WANG J C， ZHENG H X， CHANG M W， et al. Preparation of active 3D film patches via aligned fiber electrohydrodynamic (EHD) printing[J]. Scientific Reports， 2017(7)：43924.
[20] ZHANG J H， ZHAO S C， ZHU Y F， et al. Three-dimensional printing of strontium-containing mesoporous bioactive glass scaffolds for bone regeneration[J]. Acta Biomater， 2014，10(5)：2269-2281.
[21] WANG J， GOYANES A， GAISFORD S， et al. Stereolithographic (SLA) 3D printing of oral modified-release dosage forms[J]. International Journal of Pharmaceutics， 2016，503(1/2)：207-212.
(收稿日期：2019-04-19)
(修回日期：2019-05-22;編辑：魏民), 百拇医药(张翠芳)